The /etc/sysconfig/network-scripts/ifcfg-ethN files

The /etc/sysconfig/network-scripts/ifcfg-ethN files File configurations for each network device you may have or want to add on your system are located in the /etc/sysconfig/network-scripts/ directory with Red Hat Linux 6.1 or 6.2 and are named ifcfg-eth0 for the first interface and ifcfg-eth1 for the second, etc. Following is a example /etc/sysconfig/network-scripts/ifcfg-eth0 file: DEVICE=eth0 IPADDR=208.164.186.1 NETMASK=255.255.255.0 NETWORK=208.164.186.0 BROADCAST=208.164.186.255 ONBOOT=yes BOOTPROTO=none USERCTL=no If you want to modify your network address manually, or add a new network on a new interface, edit this file -ifcfg-ethN, or create a new one and make the appropriate changes. DEVICE=devicename, where devicename is the name of the physical network device. IPADDR=ipaddr, where ipaddr is the IP address. NETMASK=netmask, where netmask is the netmask IP value. NETWORK=network, where network is the network IP address. BROADCAST=broadcast, where broadcast is the broadcast IP address. ONBOOT=answer, where answer is yes or no. Do the interface need to be active or inactive at boot time. BOOTPROTO=proto, where proto is one of the following : none - No boot-time protocol should be used. bootp - The bootp now pump protocol should be used. dhcp - The dhcp protocol should be used. USERCTL=answer, where answer is one of the following: yes - Non-root users are allowed to control this device. no - Only the super-user root is allowed to control this device.